Microlife BP3GY1-2N, Инструкция по эксплуатации

Страница: 15 / 71

3.6. Select the user
This blood pressure monitor is designed to
store 120 measurements for each of two
users. Memories are not stored in guest mode.
Before taking a measurement, be certain that
the correct user has been selected.
a) With the monitor unlocked, press and hold the user icon, then release.
b) The user icon will begin to blink. Tap again to change users.
c) To confirm your selection wait 3 seconds, or press STOP.
3.7. Select measuring mode: standard or
Microlife Averaging Mode (MAM)
This instrument enables you to select either standard
(single measurement) or measurement averaging mode
(automatic triple measurement).
a) To select Standard mode, push the switch on the side
of the monitor to Position "1."
b) To select Averaging mode, push the switch to Position
"3." Note the "MAM" icon will illuminate on the screen.
If you select 1, then only one measurement will be taken.
If you select 3, the unit will inflate and deflate three times
resulting in one final averaged measurement.
3.8. Microlife Averaging Mode (MAM)
• In Microlife Averaging Mode (MAM), three measure-
ments are automatically taken in succession and the
result is then automatically analyzed and displayed.
Because your blood pressure constantly fluctuates, a
result determined in this way is more reliable than
one produced by a single measurement.
• After pressing the START button the selected
Microlife Averaging Mode appears in the display as
the MAM symbol.
• The bottom, right-hand section of the display shows
a 1, 2 or 3 to indicate which of the 3 measurements
is currently being taken.
14
Guest Mode