9
Averaging Mode Slide Switch:
a) If you would like to take an Averaging Mode
measurement, move the slide switch to the right.
b) Averaging Mode takes 3 measurements in
succession and calculates the result. An “A“
symbol in the display indicates that the unit is
set to the Averaging Mode.
c) There will be 15 seconds resting time in-between
each measurement. The unit will count down from 15
seconds. A beep will sound at the last 5 seconds to
remind you that the unit is about to take another
measurement.
Single mode
a) If you would like to take a single measurement, please
move the slide switch to the left.
5.5. Setting memory for user 1 or user 2
Note: Before proceeding make sure the unit is turned on.
User 2 symbol
User Selection
1
DATE/TIME
2
5.4. Measurement mode selection
Clinical studies demonstrate taking multiple blood pressure readings and calculating an “average”
is more likely to determine your true blood pressure. Your Microlife Averaging Mode unit allows you
to switch the unit to an Averaging Mode setting that automatically takes multiple readings!
User 1 symbol
This advanced blood pressure monitor allows you to track blood pressure readings for 2 individu-
als independently.
a) Before taking your measurement, make sure you set the unit for the intended user. (User 1,
User 2)
b) The unit is set to User 1. Click the User/Time button to change to User 2. The symbol indicates
user 1 or user 2.
c) Click the User/Time button again to change into User 1.
One is for a single
measurement
Three is Average
Mode Selection
MONTH-DATE
MONTH-DATE
