5.8.Memory– cancellation of all measurements
Attention!
Before you delete all readings stored in the memory, make sure you
will not need refer to the readings at a later date.
In order to delete all stored readings, depress the MEMORY button for
at least 7 seconds, the display will show the symbol «CL» and 3 short
beep sounds will be heard to indicate deletion of stored readings.
Note:
If your last stored measurement was taken in the MAM mode, you
will see the «
» symbol approximately 3 seconds during the
deletion procedure. (The display will show this symbol during
deletion of all stored measurements, if the last measurement is
taken in the MAM mode).
6.
Printer functions
This unit can be used in connection with the Microlife diagnostic printer. The unit can print out
measurements stored in the memory by pressing the PRINTER button. There are 2 kinds of formats
available. Please make sure you set the unit to User 1 or User 2 based on the data you want to print.
6.1. How to print the last stored measurement. (Single data print)
a) First select correct printer data tp print, before pressing the
PRINTER button.
b) Connect the printer with the monitor and switch the printer
on (for details please refer to the manual of the printer).
c) Click the PRINTER button of the monitor once. The display
will show «Pr1» and the printer will print the last stored
measurement for User 1 or 2 based on your selection.
6.2.How to print all measurements stored in memory
and a data chart, (data print out with chart).
a) Select correct printer objective first before you depress the
PRINTER button.
b) Connect the printer with the monitor and switch the printer
on (for details please refer to the manual of the printer).
c) Depress the PRINTER button for at least more than 3
seconds. The display will show «Pr1» followed by «Pr2».
d) Release the button, and the printer will print all stored
measurements with a corresponding chart.
6.3. Stop printing
If you would like to stop printing, click the PRINTER button
during the printing process.
Note:
Further details regarding the printer can be found in the
printer instruction manual.
12
M
1
1
2
1
Содержание BP 3BTO-1
