Microlife aponorm Professionell 47034 Скачать руководство пользователя страница 15

Страница: 15 / 48

aponorm

Professionell

Select the measuring mode: standard or MAM mode

This instrument enables you to select either standard (standard
single measurement) or MAM mode (automatic triple measure-
ment). To select standard mode, slide the MAM switch

on the

side of the instrument downwards to position «1» and to select
MAM mode, slide this switch upwards to position «3».

MAM Mode

In MAM mode, 3 measurements are automatically taken in
succession and the result is then automatically analysed and
displayed. Because the blood pressure constantly fluctuates, a
result determined in this way is more reliable than one
produced by a single measurement.

After pressing the ON/OFF button

, the selected MAM mode

appears in the display as the MAM-symbol

The bottom, right hand section of the display shows a 1, 2 or 3
to indicate which of the 3 measurements is currently being
taken.

On/Off button

, the selected MAM mode

)

buttons for 1 minute during the time setting, the time setting
mode switches off and „ - : - - “ appears in the clock display.

1. Press down Time button several seconds until „bI OFF “ appears
on the display.

2. Press Time button again, the radio clock indicator and
„ON“ appears in the display.

3. Press the M button to switch on („ON“) or switch off the radio
clock

(„OFF“).

4. Press ON/OFF button to conﬁ rm and return to standby mode, or
if the radio clock is switched off, you can press Time button to
conﬁ rm (continue with step 5).

5. The display shows a ﬂ ashing year.

a. You can press the M button to set the year.

b. Pressing the clock button ﬂ ashes the month. You can press
the M button to set the month.

c. Pressing the clock button ﬂ ashes the day. You can press the
M button to set the day.

d. Pressing the clock button ﬂ ashes the hour. You can press the
M key to set the hour.

e. Pressing the clock button ﬂ ashes the minute. You can press
the M button to set the minute.

  f.  Please press once again the clock button to complete the
    action. Then the date and time you set are shown twice each
    in succession before the device returns to standby mode. In
    standby mode, the time is displayed permanently.

If you press the On/Off button during the manual time setting,
you will exit the time setting mode. The so far entered date
and time values are kept. „-: - -“ appears in the display if you
did not set the time previously.

Switching beep On/Off

There is no beeps sound when you take a measurement using the
device. You can switch on the beeps by making the following
setting.

To switch between „beep off” and „beep on“, press and hold the
Time-button until bl and OFF appear ﬂ ashing in the display.

Press the M button to switch between OFF and ON.

Press the Time button, device shows the next setting: „Switching
radio clock on/off”. You can then press On/Off button to conﬁ rm
the beep on/off selection or go with the radio clock on/off settings.
If you select beep „OFF“, the beep function remains switched off
when you take measurements.

Select the correct cuff

Microlife offers 3 different cuff sizes: S, M and L. Select the cuff
size to match the circumference of your upper arm (measured by
close fitting in the centre of the upper arm). M is the correct size
for most people.

Cuff size

for circumference of upper arm

aponorm

by microlife offers 3 different cuff sizes: S, M and L.

Select the cuff size to match the circumference of your upper arm
(measured by close ﬁ tting in the centre of the upper arm). M-L is
the correct size for most people.

17 - 22 cm (6,75 - 8,75 Zoll)

22 - 32 cm (8,75 - 12,5 Zoll)

32 - 42 cm (12,5 - 16,5 Zoll)

)

Verwenden Sie ausschliesslich Microlife Manschetten!

17 - 22 cm (6,75 - 8,75 Zoll)

22 - 32 cm (8,75 - 12,5 Zoll)

32 - 42 cm (12,5 - 16,5 Zoll)

22 - 32 cm (8,75 - 12,5 Zoll)

22 - 42 cm (8.75 - 16.5 inches)

M-L

17 - 22 cm (6.75 - 8.75 inches)