Microlife Aponorm Professional Control, Инструкция по эксплуатации

Страница: 9 / 22

9

If you want to change the date and time
again, press and hold the MAM & time but-
ton
4
down for approx. three seconds until
the year starts to flash. Now you can enter
the new values as described above.
Selecting the correct cuff
Microlife offers different cuff sizes. Select the cuff
size to match the circumference of your upper arm
(measured by close fitting in the centre of the upper
arm).
If the cuff
8
coming with the monitor does not fit,
please contact your local pharmacy which can order
an alternative size for you.
Cuff size for circumference of
upper arm
S 17 - 22 cm
M 22 - 32 cm
M - L 22 - 42 cm
L - XL 32 - 52 cm
 In addition to the soft cuffs in the above-
mentioned sizes, as an alternative, a
preformed comfort cuff is available in M - L,
one size fits all.
 Use only aponorm
®
cuffs manufactured by
Microlife.
 All aponorm
®
cuffs are latex-free.
 Connect the cuff to the monitor by inserting the
cuff connector
10
into the cuff socket
5
as far
as it will go.
Selecting multiple/MAM or individual
measurement
Please select before each measurement whether
you want to perform a normal single measurement
(NO MAM symbol
14
in the display) or a multiple/
MAM measurement (MAM symbol
14
visible in
the display). In the MAM mode, three measure-
ments are automatically taken one after the other,
the result from all measurements is automatically
analysed and then displayed. As the blood pressu-
re varies constantly even within a very short time,
a result determined in such a way is slightly more
reliable than just one single measurement.
To select the MAM mode, press the MAM & time
button
4
until the MAM symbol appears in the
display. In order to return to the normal mode (indi-
vidual measurement), press the MAM button again
until the MAM symbol is no longer displayed.
 During the measurement in the MAM mode,
the number 1, 2 or 3 at the bottom right of the
display shows which of the three measure-
ments is currently taken.

Between the individual measurements, there
is an automatic pause of 15 seconds each,
indicated by the spinning MAM waiting symbol
19
. A countdown indicates the remaining time.