12
b) After automatically reaching an individual pressure,
the pump stops and the pressure slowly falls. The cuff
pressure is displayed during the measurement.
c) When the device has detected your pulse, the heart
symbol in the display begins to blink and a beep tone
is audible for every pulse beat.
d) When the measurement has been concluded, a long
beep tone sounds. The measured systolic and diastolic
blood pressure values, as well as the pulse are now
displayed.
e) The appearance of this symbol signifies that an
irregular heartbeat was detected. This indicator is only
a caution. It is important that you be relaxed, remain
still and do not talk during measurements. NOTE: We
recommend contacting your physician if you see this
indicator frequently.
f) The measurement results are displayed until you
switch the device off. If no button is pressed for 5 min-
utes, the device switches off automatically.
g) When the unit is set to the Microlife Average Mode setting,
3 separate measurements will take place in succession after
which your result is calculated. There is a 15 second resting
time in-between each measurement. A count down indicates the remaining time
and a beep will sound 5 seconds before the 2nd and 3rd readings will begin.
If one of the measurements causes an error message, it will be repeated one more time. If any additional error occurs,
the measurement will be discontinued and error code displayed.
Expanding the MAM measurement to see the three individual readings - This
function allows you to view the three individual measurements used to calcu-
late the MAM measurement. After taking a MAM measurement hold the memo-
ry button for 3 seconds until you hear a short beep. (Do not hold the button
longer than 7 seconds or you will delete all the readings in the memory.) Let go
of the button and watch the screen. It will automatically scroll through the three
measurements used in the MAM measurement.
Measuring
Measurement
complete
Systolic
Diastolic
Pulse
