Package contents
iM200 Subwoofer
1pc
iM200 Satellite
2pcs
iDock
1pc
Power a
pc
RCA-RCA video signal cable
1pc
3.5mm - 3.5mm audio signal cable
1pc
2 RCA - 2 RCA audio signal cable
1pc
User manual
daptor
1
Infrared remote control
1pc
Type AAA batteries
2pcs
1pc
5
Introduction
Technical Information
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in to a
power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker
may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times
while the product is in use.
25. Try to install the product near a wall socket or exetension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40 C.
o
Specifications
2
Features
* 40 Watts of total pure acoustic power
* Full range 2.1 speaker system with remote control
* High quality wooden cabinet subwoofer with X-bass technology
* Comes with docking system for iPod with charging function
* Unique satellite designs with magnetic shields
Amplifier
Speakers
Interfaces
Dimensions
Output power: 40 Watt RMS
Distribution: 12 Watt x 2 (satellites) + 16 Watt (subwoofer) RMS
Harmonic distortion: 0.3% 1 Watt 1kHz
Frequency range:
35Hz - 20kHz
Signal/Noise ratio: >80 dB
Separation: >45 dB
Input sensitivity: 400mV
High frequency drive unit: 2.5 tweeter x 2
Power: 10 Watt 6 ohm
Bass drive unit:
woofer driver
Power: 15 Watt 4 ohm
Frequency range: 35Hz - 20kHz
Speakers: 2 x RCA (Left and Right)
System to source: iPod 30pin interface, 3.5mm stereo
Product: Subwoofer - 270 x 189 x 156 mm (W x H x D)
Satellites - 90 x 175.5 x 90.5 mm
Weight: 4.8 kg
"
5"
Speaker power supply:
AC 120V ~ 60Hz, 280mA
iDock power supply:
AC 100V - 240V, 60Hz
(W x H x D)
Power
Made for iPod:
iPod (20GB, 30GB, 40GB, 60GB only),
iPod (photo) 40GB, 60GB only,
iPod (color) 30GB, 60GB only,
iPod (video) 30GB, 60GB, 80GB only,
iPod mini (4GB, 6GB only),
iPod nano (1GB, 2GB, 4GB, 8GB only)
iPod is a trademark of Apple Inc., registered in the U.S. and other countries
"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been
certifed by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Hi-Fi quality 2.1 subwoofer speaker system with iDock system
Quality speakers designed for multimedia and computer application. Perfect for digital media
playbacks. Microlab's X-bass technology for bass depth and full range resolutions.
Surround system that fills your room with clear and perfect acoustic. Support various connection
interfaces for multiple digital playback devices, such as 3.5mm stereo, RCA stereo and iPod.