OPERATION PRECAUTIONS & SAFETY
7
In table saw operations, the rip fence
must be securely locked parallel to
the saw blade within the usable range
of the GRR-RIPPER 3D Pushblock
system .
When using this tool in conjunction with
any other tool, first read and follow all
instructions and safety information in
the owner’s manual for that tool .
Always wear safety glasses and hearing
protection . Follow all normal shop
safety practices .
It is the sole responsibility of the
purchaser of this product to ensure that
any third party reads and agrees to all
safety precautions and terms prior to
their use of this tool .
In table saw operations, the GRR-
RIPPER 3D Pushblock system must be
used so it is in full contact with the rip
fence at all times, and the saw blade
MUST pass through and without cutting
into any part of the GRR-RIPPER .
Use maximum possible coverage of the
non-slip pads on the workpiece .
The GRR-RIPPER 3D Pushblock system
must be used in an absolute stable
condition . When a workpiece is narrow
and is not covered by the leg on the
left (away from fence), the Balance
Support must be secured to the left leg
so the bottom surface of the Balance
Support is in full contact with the table
top to secure the steadiness of the tool
during the entire cutting operation .
The non-slip pads placed on the top
surface of the workpiece must be in
full contact with the workpiece .
Frequently inspect the effectiveness
of the non-slip pads . Remove built-up
dust as necessary with denatured or
91% rubbing alcohol .
When using only one GRR-RIPPER, we
suggest both hands on the tool; one
gripping the handle, and the other
placed on top of the main body .
Use the Balance Support, Adjustable
Spacer and Stabilizing Plate as
appropriate to help support and control
small or irregularly shaped parts .
See
Figure 16 .
If the GRR-RIPPER does not
appear stable, or you are not confident
in making the cut, do not proceed .
Use saw blades that are designed for
the intended cutting operation .
PROPER USE
