PROGRAM A CONTROL FOB
P
master code
●
point blue control fob
at the lock and press the button
☼
(6x)
Example:
P
123455
●
point blue control fob at the lock and press the button
☼
(6x)
Result: The control fob can now unlock the
Micro
IQ
.
UNLOCK USING THE CONTROL FOB
●
Press the button on the blue control Fob
Note: If the knob is left in the unlocked position for more than 20 seconds, the user code will
be erased. However, if the
Micro
IQ
is left unlocked for less than 20 seconds, the user code
will not be erased and the device can still be unlocked with that code.
Double digit codes:
The numbers 6, 7, 8, and 9 can be entered by pressing two keys simultaneously in order to produce a
sum. For example 2 and 4 can be pressed simultaneously to produce the number 6 (2+4=6). Note, if
the code was programmed using 2+4 as the 6 digit, the 2+4 must be used when accessing the lock,
because other combinations that equal six such as 1+5 are distinguished from 2+4.
Switching Modes
Note: The master code is retained when switching modes.
1. Unlock the
Micro
IQ
and turn the knob to the unlocked position
2. Remove the battery for 10 seconds
3. While holding the program button,
P
, rein
sert the battery and wait until all 3 LED’s
●
▲
■
fade in and fade out simultaneously
4. Release the program button
5. Enter the 6 digit master code. When the master code is entered correctly, the yellow LED will
illuminate.
6. Press button number
1
for station mode, press button number
2
for locker mode,.
7. Onc
e the lock switches modes, the LED’s will flash in a certain order according to the mode
selected.
a. Locker Mode:
●
■
▲
b. Station Mode:
●
▲
■
8. Proceed to operate the lock in the selected mode
To watch the programming videos for the locker mode please visit
http://microiqlock.com/locker_mode
F
or the station mode video instructions please visit