Locker Mode Programming Instructions:
Note: The lock must be unlocked to program in locker mode. User codes are one time use.
CHANGE THE MASTER CODE (6 DIGITS) USING THE FACTORY MASTER CODE
P
●
factory master code
●
new master code
☼
(6x)
Example:
P
●
135243
●
112233
☼
(6x)
Result: factory master code
135243
was erased and new master code
112233
was accepted.
LOCK USING A SINGLE USE USER CODE (4 DIGITS)
new user code
●
turn knob to lock
☼
(3x)
(every three seconds)
Example: 1234
●
turn knob to lock
☼
(3x)
(every three seconds)
Result: User code
1234
was created and the device was locked
UNLOCK USING A SINGLE USE USER CODE
new user code
●
turn knob to unlock
Example: 1234
●
turn knob to unlock
Result: User code
1234
was used to unlock the lock.
Note: The user code created in locker mode is a one time code, and is erased when the
Micro
IQ
is unlocked.
P
☼
master code
●
Example:
P
☼
112233
●
Result: Master code 1
12233
was used to unlock the
Micro
IQ
Note: If the knob is left in the unlocked position for more than 20 seconds, the user code
will be erased. However, if the
Micro
IQ
is left unlocked for less than 20 seconds, the user code
will not be erased and the device can still be unlocked with that code.
P
●
old master code
●
new master code
☼
(6x)
Example:
P
●
112233
●
123455
☼
(6x)
Result: Old master code
112233
was erased and new master code
123455
was accepted.
UNLOCK USING THE MASTER CODE
CHANGE THE MASTER CODE (6 DIGITS)