Page
3
of
14
3/31/2022
Introduction
This document details how to set up and use the MicroIQProx lock with either the
MicroTraq app or the keypad on the lock. These instructions are specific to locks in
station mode
. Close proximity to the lock is required.
Modes
The MicroIQProx lock can operate in two modes: station mode or locker mode. It is
easy to switch the mode of the lock if needed.
Station mode refers to a workstation or office environment where there are one or more
daily users of the lock. The lock is accessed repeatably with a ProxCard or keypad
code.
Locker mode refers to an environment such as a club, hotel or school where a single
user selects a temporary code or uses a ProxCards to access a given locker or storage
unit before each use. After accessing the lock, the ProxCard or keypad code is erased.
Access
The MicroIQProx lock can be accessed with:
ProxCards (master or user)
RFID tags/stickers (follow ProxCard add/delete instructions)
Keypad codes (master, supervisor, or user)
Note: The default master code is
1-3-5-2-4-3-2-4
and the default supervisor code is
123
.
There is no default user code.
The illustration below details how to position the ProxCards for the lock to read.
