Page
13
of
14
3/31/2022
Present the user ProxCard to the lock. Three green flashes indicate the ProxCards is
read. After the three green flashes additional cards can be presented one at a time to
learn into the lock.
Remove a User ProxCard
Press and hold the
P
on the lock keypad for 5 seconds. The green LED will illuminate.
Enter
35
followed by
P
on the lock keypad. The red LED will flash.
Present the master ProxCard to the lock. The green LED will flash.
Present the user ProxCard to the lock. Three green flashes indicate the ProxCards is
read. After the three green flashes additional cards can be presented one at a time for
removal.
Delete All User ProxCards
Press and hold the
P
on the lock keypad for 5 seconds. The green LED will illuminate.
Enter
32
followed by
P
on the lock keypad. The red LED will flash. Present the master
ProxCard to the lock. The green LED will flash three times to indicate the deletion is
completed.
To disable the “day-unlock” mode,
press and hold the
P
on the lock keypad for 5
seconds followed by the function code
45
, finishing by
pressing
P
to confirm.
“Day-unlock” mode
The Master ProxCard must be programmed to the lock to proceed.
To enable
the “Day-unlock” mode, press and hold the
P
on the lock keypad for 5
seconds. The green LED will illuminate. Enter
44
followed by
P
on the lock keypad.
Additional to the green LED, the yellow LED will turn on as well. Enter the Master code
then press the
P
button
to confirm. The “day-unlock” mode is enabled.
To
operate in “Day-unlock” mode, present the master ProxCard to the lock. The green
LED will flash three times. The “day-unlock” mode is active and
the lock will remain
unlocked indefinitely. To de-
active the “Day-unlock” mode, present the Master ProxCard
to the lock. This will toggle the mode to inactive and the lock will operate in Station
mode where it will auto re-lock when the knob is turned to the locked position.
