4 / 16
- ITALY - Tel. +39.035.773 925 - Fax +39.035.773 933 - e-mail: [email protected] - Web: www.microidea.it
HOME PAGE
4 quadrant indication:
- IND: inductive load.
- CAP: capacitive load.
- IND-G: inductive generator.
- CAP-G: capacitive generator.
Instant Cos
j
value.
Reactive power needed to get the desired Cos
j
.
Graphic bar to indicate the number of banks involved
to get the desired Cos
j
.
Disconnected ( out) / Connected ( in).
MODES:
MAN: allows to act on the insertions manually.
Press
for
1s
an arrow indicates the
selected step.
Scroll using
, press
to act on the
steps.
AUTO: Automatic mode (suggested) allow the
instrument to follow precisely the settled Cos
j
.
Press
for
1s
to switch between modes.
IMPORTANT: it’s possible to access the settings menu
only in MAN mode.
Capacitors overload value (%).
Step config visualization:
Not configured or not present step.
Disconnected step.
Connected step (blinks during connection).
Fan configured step.
Fan step in ON mode.
Configured step for contact NO.
Configured step for contact NC.
Instant current and voltage.
Ethernet module (optional) - Blinks when active.
Max number of steps available.
Temperature indications:
Internal (instrument).
External (using an optional probe).
Config parameter A.13
Cos
j
value:
SET: main Cos
j
.
SET-G: main Cos
j
in generator quadrant.
SET-2: secondary Cos
j,
config parameter A.13
as remote input from external contact.
A
B
C
D
E
G
H
I
L
M
N
F
