Mounting And Installing
Caution:
for added protection, mount the fixture in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel. Before mounting the fixture to any surface, make sure that the
installation area can hold a minimum point load of 10 times the devices weight.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable. Never stand directly below the device when
mounting, removing, or servicing the fixture.
Whether installing inverted on a truss or ceiling, or set on a flat level surface be
sure this fixture is kept at least 0.5m (1.5ft) away from any flammable materials
(decorations, etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including
calculating working load limits. A knowledge of the installation material being
used, and periodic safety inspection of all installation material and the fixture are
all imperative and should only be performed by a qualified technician. Improper
installation can result in bodily injury or damage.
Clamp Mounting:
The MICROH DJ LED BLADEP186 MKIII provides a unique
mounting bracket assembly that integrates 2 brackets to be used to mount on
a truss or the floor. When mounting this fixture to truss, be sure to secure an
appropriately rated clamp to the included bracket fitted through the center hole.
As an added safety measure, be sure to attach at least one properly rated safety
cable to the fixture.
Regardless of the rigging option you choose for your MICROH DJ LED BLADEP186
MKIII fixture, always be sure to secure your fixture with a safety cable. The fixture
provides a built-in rigging point for a safety cable hanging bracket. Be sure to only
use the designated rigging point for the safety cable and never secure a safety
cable to a carrying handle.
