© Microhard Systems Inc.
105
4.0 Configuration
Mode Set
Enable GpsGate Tracker Mode or TCP modes. In TCP Mode the IPnXGii
will establish a connection with the GpsGate Server directly without the
SMS setup process. If the TCP connection is not available, the IPnXGii will
continue to try to connect every few seconds.
Values (selection)
Disable
Enable Tracker Mode
Enable TCP Send Mode
Server Address / IP
Enter the IP Address of the server running the GpsGate application.
Values (IP Address)
0.0.0.0
Server Port
Enter the TCP Port of the server running the GpsGate application.
Values (Port)
30175
Server Interval
Define the interval at which the IPnXGii will send data to the GpsGate
Server.
Values (seconds)
60
Motion Distance
Set the motion threshold in which the IPnXGii will be triggered to send
location data.
Values (meters)
100
When GPS Invalid, Sending Data
Specify what happens when the GPS data is invalid, either use the last
valid position or do not use the last valid position.
Values (selection)
Not Use Last Valid Position
Use Last Valid Position
Send IO Status
When enabled, the IPnXGii will send the current status of the Digital I/O
inputs and/or outputs to the GpsGate Server.
Values (selection)
Disable
Send Input Status
Send Output Status
Send Input&Output Status
