Microhard Systems IPN3G, Руководство по эксплуатации

Страница: 30 / 238

© Microhard Systems Inc. 30
4.0 WebUI Configuration
Image 4-8: Network Configuration , Local IP Configuration Submenu
4.3 Network
4.3.1 Network > Summary
The Network > Summary tab gives an overview of the configuration of the Ethernet port on the IPn3G. This
port is the RJ45 port located on the back of the IPn3G.
Within any IP network,
each device must have its
own unique IP address.
A SUBNET MASK is a bit
mask that separates the
network and host (device)
portions of an IP address.
The ‘unmasked’ portion
leaves
available the
information required to
identif y
the various
devices on the subnet.
Ethernet Port Status: The Ethernet port status shows the type and status of the local Ethernet Link.
IP Address:
This is the currently configured logical IP address of the IPn3G. This IP address must
be set statically in the Network > Config tab. This is generally set to a Private IP
address for a local network.
IP Subnet Mask: The IP Subnet Mask is the current Subnet Mask being used by the unit to define the
subnet and host address of the IPn3G.
IP Gateway: The IP Gateway sets the default gateway for traffic leaving the IPn3G.
Ethenet MAC: This is the physical MAC address of the RJ45 Ethernet Port of the back of the IPn3G
USB MAC: For quick reference, this is the physical MAC address of the USB port on the front of
the IPn3G, when it is configured as a NDIS Ethernet Interface. See the USB section
for more information.