2
Unpacking:
Thank you for purchasing the LEDPHANTOMZM400. Every LED PHANTOM ZM400
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to
be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary
to operate the unit has arrived intact. In the case damage has been found or parts are missing,
please contact the manufacturer or your dealer for further instructions. Do not return this unit to
your dealer without first contacting.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR
INSTALLING LED PHANTOM ZM400 WASH. SAVE IT FOR FUTURE REFERENCE.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself;
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton when ever possible.
General Instructions:
To optimize the performance of this product, please read these
operating instructions carefully to familiarize you with the basic operations of this unit. These
instructions contain important safety information regarding the use and maintenance of this unit.
Features
Multi-Colors
Color Strobe
Electronic Dimming 0-100%
DMX-512 protocol
Master/Slave synchronization
LCD operation menu with function
buttons
Daisy Chain Units Together in DMX
Mode
Safety Precautions
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet matches that of the required voltage for your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to
remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of
electrical shock and fire in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack.
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm)
between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain
or moisture.
PLEASE
consider that damages caused by manual modifications to the device are not subject
to warranty.
