11
Replacing fuse
Only replace the fuse by a fuse of the same type and rating. Before replacing the fuse, unplug mains lead!
If you need to replace the main fuse, follow the instructions:
1) Remove the rear cover of the base by unscrewing 6 fastening screws.
2) Remove the old fuse from the fuse holder.
3) Install the new fuse into the fuse holder.
4) Replace the rear cover back to the base.
Unit not respond to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some
other DMX devices pin 5 may be ‘hot’). Also, check that all cables are connected to the right connectors;
it does matter which way the inputs and outputs are connected.
Note:
All information is subject to change without prior notice.
TROUBLE SHOOTING:
Listed below are a few common problems the user may encounter, with
solutions.
