Dimmer Speed Setting:
After select the "Dimmer Curve" and press Enter, then use Up and Down to set the desired dimmer speed
(01, 02, 03, 04), press "Enter" again to confirm.
Sound Mode
Entered "Sound mode", use <UP> and <DOWN> to set the sensitivity Sen 000 ~ Sen 100, press Enter to confirm.
Setting Static Colors
Entered "Static Color", you can select the desired solid color via the UP or DOW N buttons and confirm by Enter
(see following graphic).
Mode:
Value:
Function:
Static Color
Static color <R>
Red
Static color <G>
Green
Static color <B>
Blue
Static color <RG>
Red + Green
Static color <BG>
Green + Blue
Static color <RB>
Red + Blue
Static color <RGB>
Red + Green + Blue
User Mode
This mode allows the user set intensity of R, G, B separately to get endless color mixing from the control
board without DMX controller to set the device to run strobe desired.
Entered user mode "Manual color", use <UP> and <DOWN> to select the " R / G / B" for Colors intensity or "S" for
strobe.
Use <UP> and <DOWN> to set the colors intensity values " 0 ~ 255" or Strobe speed values "000 ~ 100"
(Freeze, Slow ~ Fast), then press "Enter" to confirm.
Automatic Mode
This fixture has a built-in automatic program.
Entered "Auto Program" mode, use <UP> and <DOW N> to select the built-in programs "Pr01 ~ Pr -12"
then press the "Enter" to confirm.
Use <UP> and <DOWN> to select the operating speed of the program(Value:Speed 000 ~ Speed100, Freeze,Slow ~
Fast), press "Enter" to confirm.
Mode:
Value:
Function:
Auto Program
Auto program Pr 01
R G B colors switching
Auto program Pr 02
7 colors switching
Auto program Pr 03
R G B colors fading
Auto program Pr 04
7 colors Fading
Auto program Pr 05
Color Macros Fading
Auto program Pr 06
Chase 1
Auto program Pr 07
Chase 2
Auto program Pr 08
Chase 3
Auto program Pr 09
Chase 4
Auto program Pr 10
Loop above pr 01~pr 09
Master/Slave Operation
