Microh LED MAX ZOOM QUAD Скачать руководство пользователя страница 4

Страница: 4 / 11

Press MODE button and select AJ-(X). Continue pressing SET UP to choose Colour Mixing AF-(X), and continue pressing
SET UP to reach the SP (XX) Auto-run Speed Set Mode and the zoom Mode Z (XXX).

Press UP or DOWN to select the built-in AJ-(X) Colour Snap program 1-8 ,the built-in AF-(X) Colour Mixing Modes 1-8,the
Colour change program Modes & Colour Mixing Modes speed SP(XX) 1-16 and the beam angle from big too small.

1-Lowest Speed

16-Highest Speed

Sound-Active Mode

Press MODE button and select SO-(X).Press UP or DOWN to select the Sound-Active Mode 1-8.

Continue pressing SET UP button and select SJ-(X). Press UP or DOWN to select the Audio Sensitivity 1-8.

1-Off Sound-Active 2-Lowest Sensitivity 8-Highest Sensitivity

Continue pressing SET UP button and select

(XXX). Press UP or DOWN to adjust beam angle from big too small.

0-the biggest beam angle 190-the smallest beam angle

Setup Mode

4 styles are built into the LED Max Zoom Quad–Display on/off mode, Display normal/inversion mode, Initialization mode, reset mode.

1. Display on/off mode: Press MODE button and select "don". Press UP or DOWN to select display always on "don" or the display off
"doFF"

2. Display normal/inversion mode: Continue pressing SET UP button and select "Stnd". Press UP or DOWN button to select display
normal "Stnd" or display inversion "evr".

3. Initialization mode: Continue pressing SET UP button and select "dEFA". Press UP and DOWN at the same time, you can

initialize it at extra factory setting, running on the the first colour change program mode, "AJ-1

4. Reset mode: Continue pressing SET UP button and select "rESt". Press UP and DOWN at the same time, the fixture will reset

automatically.

DMX Mode

You can control the fixtures individually via DMX controller. LED Max Zoom Quad is in slave mode in any situation of DMX mode
when it is combined to other LED Max Zoom Quad, but not with a DMX-controller.

Addressing:

The DMX control board allows you to assign the DMX address which is defined as the first channel from which the LED

Max Zoom Quad will respond to from the controller.

Press MODE button and select A.XXX

Press UP or DOWN to set the DMX address.

You can set 508 pcs.at most when the LED Max Zoom Quad is in 5 channel DMX mode, 507 pcs. at most when it is in 6 channel
DMX mode, 506 pcs at most when it is in 7 channel DMX mode, 505 pcs at most when it is in 8 channel DMX mode. The LED display
will flicker when there is no controller signal.

Zoom direction

1. Press MODE button and select A.XXX, then press SET UP button and select "Zd.UP".

2. Press UP or DOWN to select zoom direction up "Zd.UP" or zoom direction down "Zd.dn". "Zd.UP" means that the bigger DMX
value, the bigger beam angle; "Zd.dn" means that the bigger DMX value, the smaller beam angle.