Microframe Corporation
6
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 4600
Configuration Utility
Setup
1) Power Disp
2) Open Prog
3) Find
4) Read All
5) Scan
6) Select AP
7) Password
8) [Connect]
Summary
The Advanced version of the Config Utility allows for configuration of all Wi-Fi settings.
For Ethernet displays the only options that apply are the device NAME and PIN.
Details
[Serial] – Shows the currently connected serial port.
[Connected/Disconnected] - Automatically scans for devices and prints results to the log. It will select the
device found last.
[Read All] - Reads back settings for all three panels of the utility. Optionally you can read/write individual
panels using the respective buttons.
[Scan] - Loads list of access points (AP).
[Connect] - Used to save settings if specific options are changed. Generally this will turn green if a save is
required.
[AP] – Always returns “Ethernet” for Ethernet displays.
[NAME] - The name of the device. This is used in the app, and can also be typed into a browser, provided
NETBIOS name lookups are working on your network. i.e. "DISPLAY1/" (note the slash).
[PIN] - The PIN used by the app to connect to this display.
[Basic] - Switch back to basic mode.
2.1 Wi-Fi Display Config Utility - Advanced
