Microframe Corporation 190 Скачать руководство пользователя страница 3

Limited Warranty Agreement

Your Microframe System is warranted against failure 

due to defects in workmanship or material for a period 
of one (1) year from the date of purchase. Microframe 
Corporation  will  repair  or  replace  any  defective  unit. 
Obvious abuse or mishandling of the unit is NOT covered 
by this warranty.

Merchandise Return

If your Unit does not work satisfactorily, please give 

us  a  call.  We  may  be  able  to  clear  up  the  problem  by 
phone. If it becomes necessary to return your Unit to 
the factory, please observe the following.

1. Place Unit in a sturdy box with suffi cient packing 

material.

2.  If  requested,  include  the  power  supply.  It  is  not 

necessary to return the cable and connectors unless they 
are the problem.

3. Return the system insured and prepaid since we 

are not responsible for shipping damages and losses on 
returned Units.

Warranty Service

For warranty service, please contact Microframe at 

1-800-635-3811. A technician will gladly assist you. 

Assistance

For  any  product  assistance  or  maintenance  help, 

contact Microframe by either calling 1-800-635-3811 or 
emailing us at [email protected].

Safety

Do not install substitute parts or perform any modi-

fi cation  to  the  product  without  fi rst  contacting  Micro-
frame.

Warning

All  power  transformers,  line  cords,  and  electrical 

equipment should be kept out of the reach of children 
and away from water. (If you are installing cable in an air 
plenum area, such as a drop ceiling used for air return, 
you must use plenum-rated cable. The cable supplied from 
Microframe is rated CL2 and is approved for installation 
everywhere indoors except plenum areas.) 

Life Support Policy

Microframe's products are not authorized for use 

as components in life support devices or systems 
without the express written approval of the presi-
dent of Microframe Corporation. 

 As used herein:

1. Life support devices or systems are defi ned as sys-

tems which support or sustain life, and whose failure to 
perform when properly used in accordance with instruc-
tions for use provided in the labeling, can be reasonably 
expected to result in a signifi cant injury to the user or 
any one depending on the system.

2. A critical component is any component of a life sup-

port device or system whose failure to perform can be 
reasonably expected to cause the failure of the life support 
device or system, or to affect its safety or effectiveness.

Disclaimer

We are constantly striving to improve our products. 

Due to this, specifi cations are subject to change without 
notice.

Microframe Corporation      
P.O. Box 1700
Broken Arrow, OK  74013
1-800-635-3811

Содержание 190













Отзывы: