background image

Limited Warranty

Microfl ex, LLC warrants this unit against defects in materials and workmanship for a 
period of one year from the date of shipment.  Microfl ex, LLC will, at its option, repair or 
replace equipment that proves to be defective during the warranty period.  This warranty 
includes parts and labor.

A Return Materials Authorization (RMA) number must be obtained from the factory 
and clearly marked on the outside of the package before equipment will be accepted for 
warranty work.

Microfl ex, LLC believes that the information in this manual is accurate.  In the event that 
a typographical or technical error exist, Microfl ex, LLC reserves the right to make changes 
without prior notice to holders of this edition.  The reader should consult Microfl ex, LLC 
if any errors are suspected.  In no event should Microfl ex, LLC be liable for any damages 
arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, MICROFLEX, LLC MAKES NO WARRANTIES OR 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  CUSTOMER’S 
RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE 
PART OF MICROFLEX SHALL BE LIMITED TO THE AMOUNT THERETOFORE 
PAID BY THE CUSTOMER.  MICROFLEX, LLC WILL NOT BE LIABLE FOR 
DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, 
OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE 
POSSIBILITIES THEREOF.  This limitation of the liability of Microfl ex, LLC will apply 
regardless of the form of action, whether in contract or tort, including negligence.  Any 
action against Microfl ex, LLC must be brought within one year after the cause of action 
accrues.  The warranty provided herein does not cover damages, defects, malfunctions, or 
service failures caused by owners failure to follow Microfl ex, LLC’s installation, operation, 
or maintenance instructions; owners modifi cation of the product; owner’s abuse, misuse, or 
negligent acts; and power failure or surges, fi re, fl ood, accident, actions of third parties, or 
other events outside reasonable control.

Microfl ex, LLC
2202 Red Bird Lane
Brookshire, Texas 77423
USA

The HART protocol is supported by the HART Communications Foundation in Austin Texas, 
www.hartcomm.org.  HART is a registered trademark of the HART Communications Foundation.

Phone 281-855-9639
Fax 832-422-4391
www.microfl x.com

Содержание 101-0010









Отзывы: