Uninstalling USB Drivers
For Windows 7, Vista, XP, and 2000 - use the Device Manager to uninstall the
driver from your system. With the RS-485 Converter connected to your USB
port, locate the RS-485 converter in the hardware tree. For details on how to do
this refer to the section on “Changing the COM Port Number” in this manual.
Right click on
USB RS485 Serial Converter
and select “Uninstall” from the pop-
up menu. When the process has fi nished, unplug the converter from the USB
port.
For Windows 98 and ME
, always us the Add/Remove Programs utility to
remove the converter drivers as this uses the uninstaller program to remove the
fi les and registry entries to leave a clean system. Other methods may leave frag-
ments of the driver that may interfere with future installations.
Step 1: Disconnect any converters that are attached to the PC.
Step 2: Open the Add/Remove Programs utility located in “Control Panel\Add/
Remove
Programs”.
Step 3: Select “Microfl ex USB Converter Drivers” from the list of installed
programs.
Step 4: Click “Change/Remove” button. This will run the uninstaller program.
Click “Continue” to run the uninstaller or “Cancel” to exit.
Step 5: When the uninstaller has fi nished removing the device from the system,
the caption on the “Cancel” button will change to “Finish”.
Click “Finish” to complete the process.
4
