EasyPIC4 User
’
s Manual
1
10
0
page
M I K R O E L E K T R O N I K A S O F T W A R E A N D H A R D W A R E S O L U T I O N S F O R T H E E M B E D D E D W O R L D
MikroElektronika
Development
tools
PP
OO
WW
EE
RR
SS
UU
PP
PP
LL
YY
EasyPIC
ICD
4
As a power supply source, users can select either a regulated supply from the USB
cable (default) or an external power supply. In case of the USB power supply, the
system should be connected to a PC using the USB programming cable, while the
jumper JP1 should be set in the right-hand position.
In the case of an external power supply, the EasyPIC4 board pr5V using
an LM7805 voltage regulator. The external power supply can be AC or DC, with a
voltage between 8V and 16V and the jumper JP1 should be set in the left-hand posi-
tion. In Fig. 7 you can see USB and external power supply connectors.
GND
Vin
Vout
VCC
CN1
8-12V (AC/DC)
+
E1
470uF
C8
100nF
E2
470uF
C15
100nF
1
2
VCC
D-
D+
GND
5V
5V
USB
FP1
1
2
3
USB
y
Power Suppl
External Power Supply
EXT
EXT
USB
USB
REG1
7805
E3
470uF
JP1
POWER SUPPLY
JP1 in the left-hand
position: system will
take power from the
external AC/DC
power adapter.
JP1 in the right-hand
position: system will
take power from the
USB cable.
USB and power supply connectors
Figure 7.
Figure 8.
Power supply select jumper
Figure 9.
JP1 is set to USB power supply
EXT
USB
USB
connector
USB
connector
External power
supply connector
POWER SUPPLY
SELECTABLE
POWER SUPPLY
SELECTABLE
