OPERATION MANUAL
This operation manual contains all the information you need to
operate your FlashMover
®
All-in-1 USB2.0 Card Reader.
USING All-in-1 FlashMover
®
CARD READER
1. Connect All-in-1 FlashMover Card Reader to the
Computer by USB miniB cable
2. Open My Computer - 4 Removable Disks will be
added. It is now ready for reading/writing
3. 4 card slots for most of the Flash Memory Cards on
the market
All-in-1 FlashMover
®
CARD READER FOR xD-Picture / SMART MEDIA CARD
xD-Picture
(Front View)
Pin side of
xD-Picture
Pin side of
Smart Media Card
1. After connecting the Card Reader to the computer,
you may insert the Smart Media Card
2. Turn the xD-Picture / Smart Media Card upside
down (e.g. with the pins of the xD-Picture / Smart
Media Card facing upward)
3. Insert the xD-Picture Card into the upper Slot 3
with the card against the left hand side of the slot.
For the Smart Media Card,
please
insert the card
into the lower Slot 3 with pin facing upward.
NOTE: Each time you only can insert one card.
4. If the xD-Picture / Smart Media Card is inserted
correctly, a LED light on the Card Reader will turn
to red. If not, please remove the Card and repeat
Steps 3.
