http://www.microcyber.cn/en
~ 27 ~
Figure 5.48 Modbus CRC byte order selection
2.
Select the value that needs to be modified, then click the apply to save the modified value.
5.5.5.7
Time frame interval
1.
Select "Detailed Design"->"Modbus variable"-> the drop-down box corresponding to"frame interval
time", the interval time range is 4~10, as shown in Figure 5.49
Figure 5.49 Modbus Number of frame intervals selected
2.
Select the value that needs to be modified, then click apply to save the modified value.
5.5.6
Device Status Configuration
5.5.6.1
Register address
1.
locate the "detailed design"->"device status"-> the input box corresponding to the"register address", the
range of the register address is 1~65536, as shown in Figure 5.50
Figure 5.50 Register Address Selection
2.
Enter the value you need to modify, then click apply to save the modified value.
5.5.6.2
Bit mode
1.
Select "Detailed Design"->"device status"-> the drop-down box corresponding to"Bit mode", the Bit
mode range is 1~16, as shown in Figure 5.51
Figure 5.51 Bit Mode selection
2.
Select the value that needs to be modified, then click apply to save the modified value.
5.5.7
PV Range Setting
5.5.7.1
PV Range Source
“PV Range Source” indicates if it’s from local.
Содержание G0310
Страница 1: ...G0310 Modbus to HART gateway User Manual...
