Microcyber G0310, Руководство пользователя

Страница: 21 / 42

http://www.microcyber.cn/en
~ 16 ~
Manufacturer No Display manufacturer name
Type of
equipment
No Display device type
ID of
equipment
No Display Equipment ID Number
Long address No Display device length address
Version
information
No Display version information such as software,
hardware versions, etc
As shown in the above table, the first six device information is modifiable information.
After the information is modified, you can click the “apply” button to download the information to the device. If
the download fails, the device information will restore the content that was correctly configured last time. If you
give up the modification, do not click "apply ", click refresh, it will display the last correctly configured content.
If the address or label is downloaded successfully, the name of the device node in the left network view will
change.
iv. Configuration Information
Users can obtain and configure the configuration information of online devices.
Method to access the Configuration Information tab:
(1) The left mouse button clicks on an online device in the network view, and the right tab view displays the
tabs associated with the device.
(2) Click "configuration information" in the right tab view, and if the information is obtained successfully, the
configuration information of the device is displayed, as shown in Figure 5.21.
Figure 5.21 Configuration Information tab
The configuration information tab contains the following table:
Functional
description
Whether to
modify
Remarks
PV No The first variable, the principal variable, is
fixed to pressure
SV No Second variable, fixed to temperature
Current
value
No Show PV value corresponds to the current
value at 4~20 mA
Percentage No Display PV value as a percentage of current
range
Damping
value
Yes Choose from 0~32 in seconds
Unit Yes Displays units of PV value
Range limit Yes Maximum range display PV values
Range Yes Display the lower limit of range for PV values
Transfer Yes Analog current output mode supports linear