Temperature Transmitter | NCS TT106 | Page
Email | [email protected]
http://www.microcyber-fieldbus.com
16
Figure 5.1 Current calibration
Note
：
Calibration current and fixed current output function
can only be performed when device’s polling address is 0. Other
polling addresses are in complete digital communication mode,
which will prompt the error message “command execution failure”.
Variable monitoring
Through the variable monitoring tab, all dynamic variables of
the selected equipment can be refreshed regularly and the trend
curve of the main variables of the current equipment can be
displayed. Currently, the refreshed variables are PV value, current
value, percentage and cold end temperature.
