Microchip Technology Photodiode PGAPICtail, Руководство пользователя

Страница: 19 / 28

Operation

2004 Microchip Technology Inc. DS51514A-page 15
3.2.3 Configure the ADC
The ADC is automatically set up by the PICkit 1 Signal Analysis PC Program. The two
possible inputs are shown in Figure 3-3.
1. If in the Real Time mode of operation (strip chart), select the number of samples
from the first pull-down list.
2. Select the sample rate from the second pull-down list.
FIGURE 3-3: Standard ADC Options.
The PICkit 1 Signal Analysis PC Program allows the user to manually configure the
ADC.
1. Clicking the ADC button (see Figure 3-4) opens the ADC configuration window.
This window starts at the power-on default conditions for the ADC; therefore, it
must be configured before use.
See the PIC16F684 data sheet (DS41202) for more information on configuring the
registers.
FIGURE 3-4: Manual ADC Configuration.
1. Select Number of Samples
2. Select Sample Rate
1. Select ADC window 2. ADC Window