Microchip Technology Photodiode PGAPICtail, Руководство пользователя

Страница: 15 / 28

PHOTODIODE PGA PICTAIL™
DAUGHTER BOARD USER’S GUIDE

2004 Microchip Technology Inc. DS51514A-page 11
Chapter 2. Setup and Installation
2.1 INTRODUCTION
This chapter shows how to set up the Photodiode PGA PICtail™ Daughter Board.
Items discussed in this chapter include:
This chapter discusses:
• Required Tools
• Connecting the Photodiode PGA PICtail™ Daughter Board
• Set-up Verification
2.2 REQUIRED TOOLS
The PICkit™ 1 Flash Starter Kit User’s Guide explains how to set up the PC and the
PICkit™ 1 Flash Starter Kit. Use firmware version 2.0.2 or later.
The Signal Analysis PICtail™ Daughter Board User’s Guide shows how to install the
PICkit 1 Signal Analysis PC Program on the PC and set up the Signal Analysis PICtail
Daughter Board. It also covers the features of the PICkit 1 Signal Analysis PC Program.
The PICkit 1 CD-ROM (DS40049) contains many of the necessary files. Use version
v2.0 or later.
2.3 CONNECTING THE PHOTODIODE PGA PICTAIL™ DAUGHTER BOARD
An exploded view of how the different boards connect is shown in Figure 2-1.
FIGURE 2-1: Board Connections.
Signal Analysis
PICkit 1™ Flash Starter Kit
USB Cable
Expansion
Header (J3)
PICtail™ Daughter Board
Remove PICmicro
®
MCU
from Evaluation Socket
PIC16C745 Firmware
Version 2.0.2 or later
Photodiode-PGA
PICtail™ Daughter Board
Te
st
Po
int
s