Microchip Technology PAC1710, Руководство пользователя

Страница: 15 / 54

PAC17X0 HIGH-SIDE CURRENT
SENSORS EVALUATION
BOARD USER’S GUIDE

2015 Microchip Technology Inc. DS50002367A-page 15
Chapter 2. Installation and Operation
2.1 GETTING STARTED
2.1.1 System Requirements
To use the PAC17X0 High-Side Current Sensors Evaluation Board, the following are
required:
• A
PC running Microsoft
®
Windows
®
operating system
• A display resolution of 800x600 or larger, for viewing several windows
simultaneously
• An available USB port
2.1.2 Installing the Evaluation Board
Follow the next steps to install the Microchip Chip Manager application:
1. Before installing and running the Chip Manager, install the “MCP2200/MCP2221
Windows Driver & Installer” on the local machine. If the driver and installer
package has already been installed, skip this step. The “MCP2200/MCP2221
Windows Driver & Installer” can be downloaded from:
http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP2221 .
Follow the on-screen instructions to complete the installation process.
2. Download the ChipMan file from the board web page. Unzip the archive. The
application’s revision history and install/uninstall notes may be found in the
readme.txt
file.
3. To install the Chip Manager application and the device driver on the PC, run
ChipMan-v4.16.7-windows-installer.exe
.
4. Connect the supplied USB cable to an available USB port on the PC. Plug the
mini-B end of the USB cable into the board connector, J14. The LEDs for
VDD_Power, USB_Power, USB_OK and ALERT (LD5) should illuminate, and
the 10 Hz LED (LD7) will blink. For a description of the LEDs, see
Section 3.3 “LED Indicators” .
5. If the USB bridge driver has not previously been installed on the selected USB
port, the Driver Software Installation window pops up, prompting for the driver
install (see
Figure 2-1 ).