MIC23656
EVALUATION BOARD
USER’S GUIDE
2018 Microchip Technology Inc.
DS50002815A-page 4
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MIC23656 Evaluation Board. Items discussed in this chapter include:
•
•
Conventions Used in this Guide
•
•
•
•
DOCUMENT LAYOUT
This document describes how to use the MIC23656 Evaluation Board as a
development tool. The manual layout is as follows:
•
– Important information about the MIC23656.
•
Chapter 2. “Installation and Operation”
– Includes instructions on how to get
started with the MIC23656 Evaluation Board and a description of each function.
•
Chapter 3. “GUI Installation and Operation”
– Includes instructions on how to
install the Graphical User Interface.
•
– Describes the items in the Graphical User
Interface
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the MIC23656.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
MIC23656 Evaluation Board.
•
Appendix C. “MIC23656 Internal Registers”
– Describes the internal registers.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
