Microchip Technology MIC23656, Руководство пользователя

Страница: 15 / 37

MIC23656
EVALUATION BOARD
USER’S GUIDE

2018 Microchip Technology Inc. DS50002815A-page 15
Chapter 3. GUI Installation and Operation
3.1 GETTING STARTED
In order to install, use and evaluate the product, several software and hardware tools
are required.
3.1.1 Required Software
• I
2
C Monitor Graphical User Interface (minimum v.3.1.2)
• Microsoft
®
.NET Framework 4.5 or higher
• Adobe Acrobat Reader
3.1.2 Required Hardware
• MIC23656 Evaluation Board
• USB-to-micro-USB Cable
3.2 GRAPHICAL USER INTERFACE INSTALLATION
The following steps describe how to install the I
2
C Monitor Graphical User Interface:
1. If Microsoft
®
.NET Framework is already installed, go to Step 3 . If not, download
Microsoft
®
.NET Framework from www.microsoft.com and follow the installation
instructions.
2. If Adobe Acrobat Reader is already installed, go to Step 3 . If not, download
Adobe Acrobat Reader from http://get.adobe.com/reader/ and follow the
installation instructions.
3. Download the I
2
C Monitor Graphical User Interface (v.3.1.2) archive from
www.microchip.com/MIC23656 , under “Documentation&Software”.
4. Unzip the I
2
C Monitor Graphical User Interface archive, which contains the
setup.exe
file.
5. Double click the
setup.exe
file to open the InstallShield Wizard window and
wait for the extraction to complete. If required, the installation can be stopped by
pressing the
Cancel button.
Note: If an older version or a corrupted version of the current I
2
C Monitor
Graphical User Interface is already installed on the computer, please see
Section 3.3 “I
2
C Monitor Graphical User Interface Uninstall” before
proceeding with the installation.