Microchip Technology EV07D36A, Руководство пользователя

Страница: 5 / 54

HV2916 ANALOG SWITCH
EVALUATION BOARD
USER’S GUIDE

2021 Microchip Technology Inc. DS50003160A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
HV2916 Analog Switch Evaluation Board. Items discussed in this chapter include:
•
Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the HV2916 Analog Switch Evaluation Board as
a development tool to emulate and debug firmware on a target board. The manual
layout is as follows:
•
Chapter 1. “Product Overview” – Important information about the HV2916
device.
• Chapter 2. “Installation and Operation” – This chapter includes instructions for
how to begin using the HV2916 Analog Switch Evaluation Board.
• Chapter 3. “GUI Description” – This chapter describes the features of the GUI
PC software.
• Chapter 4. “PCB Design and Layout Notes” – This chapter explains important
points of the PCB design of the HV2916 Analog Switch Evaluation Board.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the HV2916 Analog Switch Evaluation Board.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
HV2916 Analog Switch Evaluation Board.
• Appendix C. “Demo Board Waveforms” – Describes the various demo
waveforms for the HV2916 Analog Switch Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com ) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics, to open a list of available online help files.