Motion Sensor Demo Board Quick Start Guide
Microchip Proprietary
Page 3
pair the demo to the target. This section describes the basic features of the hardware included,
and provides instructions for how to install and use the Motion Sensor Demo Board.
Hardware:
ZENA Wireless Adapter
Power sources:
The Motion Sensor Demo Board can be powered in one of two ways. Make sure only one power
source is connected to the board at a time.
1)
Mini USB cable (power supplied via USB bus).
2)
1 x AAA Battery : On battery holder on the back side of the board
To power with battery, insert battery into the battery holder.
ICSP Header
Digital Compass
PIC24FJ256GB206
switch
Voltage Booster
Invensense MPU 6050
Mini USB connector
SST Flash
MRF24J40MA Module