Figure 5-2. Attaching Pin-Headers to the Curiostiy Nano Board
Figure 5-3. Connecting to Curiosity Nano Base for Click boards
™
Tip:
Start at one end of the pin header and gradually insert the header along the length of the board.
Once all the pins are in place, use a flat surface to push them in.
Tip:
For applications where the pin headers will be used permanently, it is still recommended to solder
them in place.
Important:
Once the pin headers are in place, they are hard to remove by hand. Use a set of pliers and
carefully remove the pin headers to avoid damage to the pin headers and PCB.
5.1.3
Operational Amplifier
PIC18F16Q41 features an internal operational amplifier (OPA) with a flexible connection scheme using multiple
inputs, inverting and non-inverting. This allows a large number of analog signal conditioning configurations, many
requiring no external components.
For information about operational amplifier on the edge connector and any shared functionality see
PIC18F16Q41 Curiosity Nano Pinout
5.2
Peripherals
PIC18F16Q41 Curiosity Nano
Hardware User Guide
©
2020 Microchip Technology Inc.
User Guide
DS50003048A-page 26
