2015-2020 Microchip Technology Inc.
DS40001804D-page 4
CURIOSITY LOW PIN COUNT DEVELOPMENT
BOARD USER’S GUIDE
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
Curiosity LPC Development Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Website
• Development Systems Customer Change Notification Service
• Customer Support
• Revision History
DOCUMENT LAYOUT
This document describes how to use the Curiosity LPC Development Board as a
development tool to emulate and debug firmware on a target board. The document is
organized as follows:
•
Chapter 1. “Introduction to Curiosity Low Pin Count (LPC)”
– This chapter
contains general information regarding the Curiosity LPC Development Board kit
contents, layout and power source.
•
– This chapter offers information on how to
program the Curiosity LPC Development Board.
•
– Consult this chapter for troubleshooting
information.
•
– This appendix lists the Curiosity LPC Development
Board schematic.
•
– Refer to this appendix for general notes on
using the Click module sockets and the solder blob jumpers.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
