Microchip Technology ATtiny817 Xplained Pro, Руководство пользователя

Страница: 17 / 23

...........continued
Designator Mounted From (mEDBG) To (ATtiny817)
R205 No CLK_OUT PA3 CLKI
R206 Yes CDC UART RX PB2 UART TX
R207 Yes CDC UART TX PB3 UART RX
4.5 Peripherals
4.5.1 LED
There is one yellow LED available on the ATtiny817 Xplained Mini board that can be turned ON and OFF. The LED
can be activated by driving the connected I/O line to VCC.
Table 4-8. LED Connection
ATtiny817 Pin Function Shared Functionality
PC0 Yellow LED0 Shared with J200 and J201
4.5.2 Mechanical Button
ATtiny817 Xplained Mini contains one mechanical button. This is a generic user-configurable button, and when a
button is pressed, it will drive the I/O line to GND.
Info: There is an external pull-up resistor connected to the generic user button.
Table 4-9. Mechanical Button
ATtiny817 Pin Description Shared Functionality
PC5 User button J200 , J201 , and J203
4.5.3 QTouch Buttons
ATtiny817 Xplained Mini contains two QTouch buttons for use with the internal PTC module of the device.
To get started using the QTouch buttons, open the QTouch Tiny817 Xplained Mini Selfcap Example in Atmel START
( http://start.atmel.com/#examples ).
Tip: The touch button on the kit is placed in the inner layers of the PCB and has a very small overlay. Due
to the short distance from the sensor to the touch area, it might be oversensitive. Different overlays can be
used to avoid saturation of the sensor.
Table 4-10. QTouch Buttons
ATtiny817 Pin Function Description Shared Functionality
PA6 PTC2 QTBTN1 J204
PA7 PTC3 QTBTN2 J204
ATtiny817 Xplained Mini
Hardware User Guide
©
2019 Microchip Technology Inc.
User Guide
DS50002657B-page 17