Microchip Technology ATtiny817 Xplained Pro, Руководство пользователя

Страница: 13 / 23

Table 4-2. J201 Digital I/O High Header
J201 ATtiny817 Pin Arduino Numbering Functions Comment
1 PC5 D8 TCA_W5 Not connected by default. Can be connected by adding a 0Ω resistor to
R204. Shared with
J200 , J203 , and user button .
2 PA0 D9 UPDI Not connected by default. Can be connected by adding a 0Ω resistor to
R200. Shared with
UPDI .
3 PC3 D10 SPI SS
4 PC2 D11 SPI MOSI Shared with J200
5 PC1 D12 SPI MISO Shared with J200
6 PC0 D13 SPI SCK Shared with J200 and user LED
7 GND GND
8 AREF
9 PA1 D14 I2C SDA
10 PA2 D15 I2C SCL
Table 4-3. J202 Digital I/O Low Header
J202 ATtiny817 Pin Arduino Numbering Functions Comment
1 PB3 D0 UART RX Shared with mEDBG CDC
2 PB2 D1 UART TX Shared with mEDBG CDC
3 PB4 D2 TCA W1
4 PB5 D3 TCA W2
5 PA3 D4 TCA W3
6 PC4 D5 TCA W4
7 PB6 D6
8 PB7 D7
Table 4-4. J203 Power Header
J203 ATtiny817 Pin Arduino Numbering Functions Comment
1 NC
2 VCC IOREF VCC_TARGET
3 PC5 RESET GPIO Disconnected by not mounted 0Ω resistor R208. Shared with J200 ,
J201 , and user button .
4 3.3V VCC_P3V3
5 5.0V VCC_P5V0
6 GND GND
ATtiny817 Xplained Mini
Hardware User Guide
©
2019 Microchip Technology Inc.
User Guide
DS50002657B-page 13