Figure 8-3. Software Component option selection
4.
After creating the Project, right click on the
Project
to open the setting page. Select
Options for
Target
, as shown in the following figure.
Figure 8-4. Options for Target
4.1.
In the Options for Target window, select the
Target
tab and set the following:
•
Select “Use MicroLIB” check box
•
For this sample project, a customized scatter file is used. Using a similar scatter file
instead of the memory map from this page is recommended.
ATSAMB11
©
2017 Microchip Technology Inc.
User Guide
DS70005335A-page 83
