4
aTTo Digital aTTo Digital| website:
www.atto-digital.com
; email: [email protected]
● Operations:
◆
One button recording:
Push the “on/off” button to “ON” position and the recorder will
start recording and a blue light will blink during recording.
Press “Mode” button to shift the recording modes from initial “continuous recording mode” to
“voice activated recording mode”.
So with
iTROJAN
voice recorder you can choose between 2 recording modes:
1. Continuous recording mode which is the recorder default working mode, with a recording
quality of 192Kbps.
iTROJAN
will record up to 32 hours (if the battery is full) all
sounds/voices on a 15 ft radius continuously.
2. Voice activated recording mode with a quality recording of 512 Kbps for a more accurate
voice activation system. In this mode, it will record ONLY if sounds/voice are detected in the
recorder action radius. The periods of time with complete silence won't be recorded to avoid
long hours of silent recording so, you can listen the footage much easier, especially those long
hours recordings.
IMPORTANT: Once you set the device on Voice Activated Mode, when the volume of the
sound source drops below 40dB, the device will PAUSES recording automatically. It will
record again once a sound over 40dB is detected. The 40 dB is equivalent for a normal voice
conversation in a radius of 10 feet.
Useful tips for understanding the device:
1. The blue light in CONTINUOUS recording mode blinks slower than it’s blinks in VOICE
ACTIVATED recording mode.
2. When the built-in memory is full, the blue light will blink very fast and shutdown
automatically. Please connect the device to PC to delete or transfer unnecessary files to free
some memory of the device, or if you don’t need anymore the recorder files, you can choose
to FORMAT the drive and so you will very quickly erase all the files.
3. Please note that in recording mode, you do not need to remove the cap of the
iTROJAN
.
The hole for the microphone is at the top of the sphere, near the lanyard hole.
All you need to do is push the switch to ON and select a recording mode .
