3
aTTo Digital aTTo Digital| website:
www.atto-digital.com
; email: [email protected]
How to use the iTROJAN
Before you use the device, you will first want to charge it by removing the cap and plugging it
into a USB source with the provided USB cable.
IMPORTANT:
While charging the device (plugged into a USB port),
please make sure the switch is OFF.
Once you have plugged it in, open „My Computer‟ (in Windows) or Finder for MAC, and
double click on the new drive that it appeared into your system.
In this new partition, you must find a folder named as
“RECORD”
◆
Time setting:
Please connect the recorder to the PC and create a new text file into
the folder
RECORD,
with the name of the file:
time
. It’s very important that the time.txt file
to be in the folder RECORDER, otherwise the device will not set the time and it will use the
original date and time of the manufacture date. So in the folder RECORD you must see now a
folder VOICE (where the audio recorded files it will be saved) and the new text file that you
have created before named:
time ,
with the extension of the file
.txt
. Open
time.txt
file with
any text editor installed in your system and put the current time and date with the following
format: yyyymmddhhmmss , where yyyy - is four digit year (ex. 2017), mm - is 2 digit month
(ex. for May is 05), dd - 2 digit day (ex. if today is in 3rd - you must put 03). hh - means 2
digit hour in the 24 hours format ( not a.m. or p.m.) - ex. for the time clock 5 p.m. you must
use the digit 17, for 6 a.m. is 06, etc; mm - is 2 digit format for minutes and ss - is 2 digit
format for seconds.
Let’s take for example of how to create the format of date and time:
If today is
22 of May 2017
, the time is
05:24
p.m. you must put in the time.txt file the
following digits:
20170522172400
(no spaces in front or after these digits). After you insert
these digits in the time.txt file save the file, disconnect the recorder from the computer and
when you will turn it ON the device will automatically create audio files named after the time
and date when you start the device.
