Microaces Scrappee Classic, Инструкция по сборке

Страница: 3 / 29

3
1 x piano wire elevator control rod
1 x piano wire rudder control rod
2 x 3D printed wheel hubs
2 x Sponge Tyres
4 x Ø 4mm x 1mm neodymium magnets
4 x Ø 3mm x 1mm neodymium magnets
1 x 160mm x 0.4mm x 1mm carbon fibre strip
1 x 105mm or 100mm carbon fibre Ø 1mm rod
1 x Self adhesive Hook & Loop strips
Sheet Parts 1 x 2mm Laser cut Depron airframe
1 x 1mm printed & laser cut Depron fuselage
2 x 1mm printed & laser cut Depron flight surfaces
1 x 200 micron printed & laser cut polypropylene
1 x polyester sticker sheet
1 x 0.8mm laser cut plywood motor mount
Loose Parts
Knife or Scalpel with fresh blade
Steel Rule or straight edge
Sanding Stick or sand paper (180 grit recommended)
Tweezers
Needle nose pliers
UHU por foam safe adhesive (For foam & plastic)
RECOMMENDED TOOLS/GLUES
KIT PARTS