Microaces PERCEE, Инструкция по сборке

Страница: 8 / 52

8
IMPORTANT INFORMATION ON GLUING TYVEK
Tyvek may distort when exposed to glues that use a petroleum or aliphatic solvents.
When assembling Tyvek parts & panels using UHU por or similar petroleum or aliphatic based contact adhesives, allow the glue to
thoroughly dry before attaching. When the glue is dry, any effect on Tyvek minimised.
Where possible, apply the glue to the material the Tyvek is to be stuck to and allow the glue to dry on that surface.
When glue has to be applied directly to Tyvek, use sparingly and apply evenly. Any material distortion should return to shape once
the solvent has evaporated.
If using other glues, please test on a scrap piece of material before proceeding.
TYVEK PARTS