Micro Rain MR40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 11 / 29

CHECKING MACHINE
BEFORE START UP
( CHECK-LIST )
1. Check the oil level of the gearbox and if necessary add SAE 80W/90. Keep oil level at the side
plugs in the gearbox in order to bathe the shift fork in oil.
2. Grease the machine thoroughly (all grease fittings) and thereafter, grease every 100 hours.
( see fig 1 ). Pay close attention to the two grease fittings on the drum inlet. One grease fitting is located
on the bottom side and lubricates the drum inlet seals. Grease must be spread on the drum gear teeth
and at the drive shaft where the drum gear and drive gear mesh. The scroll bar must also be kept well
greased, and the scroll knife must be lubricated (grease fitting) in order to function correctly.
3. Check the tire pressure and if necessary, inflate to pressure recommended on the tire (generally 35psi).
10
FIG 1
LUBRICANT TABLE
Gearbox SAE 80W/90
Reel Supports Grease NLGI No.2
Grease Fittings Grease NLGI No.2