MICRO PANEL
Device description GF0
Introduction
Technical subject to change
M000235-01.DOC
© by Micro Innovation
7
2 I
NTRODUCTION
The Micro Panel GF0 is a visualisation unit that is provided with touch zone functions for medium to
high complexity automation systems. It meets all the requirements placed on a modern visualisation
unit.
The Micro Panel GF0 must be loaded with the necessary project data before it can be used. The
project data is created and loaded using a PC and the GALILEO design software for the GF series.
This software is described in a separate documentation. The data transfer between the PC and the
Micro Panel GF0 (Download) is implemented via a serial interface. The project data is then stored
inside the device in a retentive memory.
The Micro Panel GF0 is provided with a slot for the communications card (
→
Section 11) which
manages the communication with the automation device. The communications cards are not
described in this documentation. Refer to the relevant device descriptions for more information.
This device description should be used as a reference for the installation, connections, technical data,
commissioning, operation and maintenance of all Micro Panel GF0 versions. The illustrations in this
document are for the 10" version (
→
Section 3) unless stated otherwise. The designation and function
of the terminals and signals are the same, however, for all versions.
efesotomasyon.com - Klockner Moeller - inverter
