Page 8
scanCONTROL 25xx
8.
First Profile
Now start the scanCONTROL Configuration Tools software.
Click
Display Profiles
in the main window.
If the software shows the error message
No scanCONTROL found
in the status line,
please check the Ethernet connection between scanCONTROL and the PC.
On the left side you can adjust the settings for your measurement task, the right side
shows the profile data and further information about the measurement.
9.
How to Access Profile Data
Profile data of scanCONTROL can be accessed via:
- GigEVision and GenICam for digital cameras via Ethernet interface
- SDK for fast integration into applications (C, C++, C# and others)
Please refer to the respective SDK documentation for further information on accessing
the profile data.
10.
Transmitting Measurement Results
scanCONTROL 25xx/BL offers the following options for transmitting measurement
results:
- Ethernet interface
Modbus TCP protocol
UDP protocol
Analog output of measurement values (via optional 2D/3D Output Unit)
Digital output of switching signals (via optional 2D/3D Output Unit)
Fieldbus connection PROFINET, Ethernet/IP, EtherCAT (via optional 2D/3D Gate-
way)
- RS422 interface
Modbus RTU protocol
Transmission of measurement values in ASCII format
