MICRO-EPSILON scanCONTROL 25 100 Series Скачать руководство пользователя страница 8

Страница: 8 / 60

Page 8

Safety

scanCONTROL 25xx

The supply voltage must not exceed the specified limits.

> Damage to or destruction of the sensor
Avoid continuous exposure to dust and spray on the sensor by appropriate methods such as blowing or us-

ing a protective housing.

> Damage to or destruction of the sensor
Do not touch the protective windows of the optics with the fingers. Immediately wipe off any fingerprints, see

Chap.

6.6

Protect the cable against damage.

> Failure of the measuring device

Do not plug or unplug devices during the operation.

1.3

Notes on CE Marking

The following apply to the scanCONTROL 25xx sensor:

- EU directive 2014/30/EU

- EU directive 2011/65/EU, “RoHS“ category 9

Products which carry the CE mark satisfy the requirements of the EU directives cited and the European

harmonized standards (EN) listed therein. The EU Declaration of Conformity is available to the responsible

authorities according to EU Directive, article 10, at:
MICRO-EPSILON MESSTECHNIK

GmbH & Co. KG

Königbacher Strasse 15

94496 Ortenburg / Germany

The sensor is designed for use in industry and satisfies the requirements.

Содержание scanCONTROL 25 100 Series





























































Результаты поиска

Содержание scanCONTROL 25 100 Series

Отзывы:

Похожие инструкции для scanCONTROL 25 100 Series

Бренды по названию

Популярные бренды

MICRO-EPSILON scanCONTROL 25 100 Series, Руководство по эксплуатации

Результаты поиска

Содержание scanCONTROL 25 100 Series

Отзывы:

Похожие инструкции для scanCONTROL 25 100 Series

Бренды по названию

Популярные бренды