Page 16
Appendix | Optional Accessories
RS232 Ethernet Converter
Appendix
A 1
Optional Accessories
Designation
Description
Article number
CAB-RJ45-Eth; 2m-PVC-Cat5e; RJ45-Eth
Ethernet connection cable, 2 m long
11294232
CAB-RJ45-Eth; 5m-PVC-Cat5e; RJ45-Eth
Ethernet connection cable, 5 m long
11293257
CAB-RJ45-Eth; 10m-PVC-Cat5e; RJ45-Eth
Ethernet connection cable, 10 m long
11293702
CAB-RJ45-Eth; 20m-PVC-Cat5e; RJ45-Eth
Ethernet connection cable, 20 m long
11234419
Connector cross Ethernet; 0.5 m
Ethernet connector including crossed
Ethernet connection cable 0.5 m
11293227
A 2
Software
The configuration of the RS232 Ethernet converter takes places uniquely in connecting the RS232 Ethernet
converter to the sensor and the connection to the network.
Relevant settings, like the adjustment of the baud rate to those of the sensor and the assignment of the IP
address, can be made by the network administrator using the supplied “Deviceinstaller“ program with a com
-
fortable user interface.
The RS232 Ethernet converter makes it possible to connect the sensor via the TCP/IP protocol.
The RS232 Ethernet converter is based on the Lantronix XPort module.
In order to parameterize the RS232 converter (assignment of IP address, setting of baud rate of 19200), the
free made available software (“DeviceInstaller“) of Lantronix®, Inc. can be loaded under
http://www.lantronix.com/support/downloads/?p=DEVICEINSTALLER
The DeviceInstaller is based on the „.NET„ framework from Microsoft.
A detailed instruction manual of the software “DeviceInstaller“ can be ordered by Lantronix ®, Inc.
The settings remain also after a hardware reset.
